Kitchen & Dining Supplies ｜APH 65/85 Hydrostatic Plates - Hourmeter (3 Shaft)

Highly productive on any ground.   The APH 65/85 is a powerful worker that delivers compaction force every step of the way.
The plate is equipped with the market-leading Ammann three-shaft exciter system, which not only enables performance and climbing ability but also makes the machine more responsive and easier to handle for the operator.
The optional ACEforce compaction measuring system is a key tool many contractors utilise in efforts to achieve thorough, efficient compaction results.

AMMANN TRIPLE-SHAFT EXCITER SYSTEM
Ammann is the technological leader in plate compaction with its patented triple-shaft exciter system. The system keeps plate movement consistent, which in turn enables smooth travel – even through heavy, cohesive soils – and helps effortlessly overcome steep grades. APH machines are impressive climbers and can even do so while backfilling saturated areas – work that can leave competitive products at a standstill.

LOW HAND-ARM-VIBRATION VALUES (HAV) TO THE OPERATOR
The standard hand guide for APH plates is isolated to minimise hand-arm vibration. Levels lower than 2.5 m/s² (excluding APH 100-20) enable operators to work longer shifts with the best comfort. The vibration levels are so low that safety codes do not require documentation of operator hours.

AMMANN ORBITROL STEERING
Ammann Orbitrol steering controls the adjustment of the centrifugal weights, allowing a smooth and easy change of direction while ensuring great accuracy on the jobsite. Machine speed and direction can be adjusted by a simple turn of the steering control lever. The machine also can hover and provide on-the-spot compaction for the more challenging areas. This system also helps improve productivity in corners and other tight spots.

FULLY HYDROSTATIC DRIVE
A fully hydrostatic drive system eliminates the need for a V belt and a centrifugal clutch – and the maintenance that go with them. A hydraulic motor drives the eccentric shafts.

ACE COMPACTION EXPERT - BIG TECHNOLOGY IN A SMALL PACKAGE
APH Hydrostatic Vibratory Plates can be equipped with the industry-proven Ammann Compaction Expert (ACE), an automated compaction measurement and control system. The ACE system on the vibratory plates utilises the same technology that has been used on Ammann’s heavy compaction machines for years. It provides operators with an accurate indication of soil stiffness and whether desired compaction has been achieved.
 

Weights & Dimensions

Machine weight basic unit
471 kg

A
Base plate length
470 mm

B
Machine length
930 mm

C
   with handle
1840 mm

D
Machine heigth
905 mm

E
Handle height (work)
1000 mm

F
Handle height (transport)
1500 mm

G
Machine width
700/850 mm

Engine

Engine
Hatz 1D81S

Fuel
Diesel

Engine Output
13.7 HP / 10.1 kW

    at RPM
3000 rpm

Fuel consumption
2.5 l/h

Compaction Forces

Max. Vibration frequency
55 Hz

Max. Centrifugal force
65 kN

Working surface basic unit
1632 m²/h

Max Surface Pressure
19.76 N/cm²

Miscellaneous

Operating Speed
32 m/min

Tank capacity
7 l

Gradeability
36%

Max. incline to all sides
30°

Options

Extension Plates
75 mm / 150 mm

Operation hour meter
x

Electric starter
x

Emergency stop
x

ACE econ

X

ACE force

x

Working lights
–
Brand:AmmannSKU:APH 65/85Tags:Compaction Equipment, Forward / Reversible Plate Compactors